System design architect tutorial problem

Hello i have followed the system design architect tutorial. I followed each step carefully i have managed to create a system in Qsys and program it but it doesnt show pictures

the console message

--- Quote Start ---

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00

Processor is already paused

Reading System ID at address 0x01000800: verified

Initializing CPU cache (if present)

OK

Downloading 06000020 ( 0%)

Downloading 06010000 (12%)

Downloading 06020000 (24%)

Downloading 06030000 (37%)

Downloading 06040000 (49%)

Downloading 06050000 (62%)

Downloading 06060000 (74%)

Downloading 06070000 (87%)

Downloading 06080000 (99%)

Downloaded 514KB in 9.0s (57.1KB/s)

Verifying 06000020 ( 0%)

Verifying 06010000 (12%)

Verifying 06020000 (24%)

Verifying 06030000 (37%)

Verifying 06040000 (49%)

Verifying 06050000 (62%)

Verifying 06060000 (74%)

Verifying 06070000 (87%)

Verifying 06080000 (99%)

Verified OK

Starting processor at address 0x060001BC

--- Quote End ---

Nios II Console message

--- Quote Start ---

---------------------------------------

Nios II Embedded Evaluation Kit

Picture Viewer Demo

---------------------------------------

Initializing IO devices...

Intitializing LCD control registers & gamma curve...[alt_tpo_lcd_init] Warning: Read incorrect chip ID.

--> Expected 0xc0, read 0xf0

--> The gamma curve or other LCD register writes may not succeed.

Success.

Intitializing video display driver...Success.

Initializing touchscreen...Success.

Creating uC/OS-II tasks & resources...Success.

Now processing file: 1.jpg ...

Premature end of JPEG file

Not a JPEG file: starts with 0x00 0xff

--- Quote End ---

It's the second time i tried to run this and it doesnt work Please help

Thank you!