Forum Discussion

New Contributor

6 years ago

Stratix 10 MX FPGA dev. kit fails DMA link test under CentOS 7.0.1406 with kernel 3.10.0-123.el7.x86_64

Two questions 1. Though /dev/intel_fpga_pcie_drv is created, why link test always fails ? kernel log says module verification failed. 2. Why there is only one related log in /var/log/kern.log even ...

SengKok_L_Intel

Regular Contributor

6 years ago

One thing you probably can check is from the BIOS setting, where the Socket Configuration for IIO PCIe Port is x16 or something else. Or a quick check with other Host and see if this can be detected. This can help to isolate if there is any hardware dependency.

Regards -SK

Forum Discussion

Stratix 10 MX FPGA dev. kit fails DMA link test under CentOS 7.0.1406 with kernel 3.10.0-123.el7.x86_64

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work