Forum Discussion

ManfredO's avatar
ManfredO
Icon for New Contributor rankNew Contributor
6 years ago

Starting with DE0-Nano-SoC

Hi, i recently bought a DE0-Nano-SoC board and like to get something done. Could you give me some advices. Have seen lots off tutorials but nearly all of them are pretty old dont want to get into a...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


You can build on Windows too, but you unable to use the latest version of Quartus.


You can still use the Quartus version 18.1 std, after generating and compiling the GHRD you can use the BSP editor and SoC EDS windows version to make the SD card image.


  • ManfredO's avatar
    ManfredO
    Icon for New Contributor rankNew Contributor
    5 years ago

    Hi,

    i have some questions on interrupts. What steps should be done to set up the board to get interrupts from fpga and view them in Linux? Do i have to enable any bridges or update the preloader or u-boot? Are there any examples except those provided in SOCEDS.

    Thanks and thrilled to here from you

Recent Discussions