Forum Discussion

New Contributor

7 years ago

Single-Device PS Configuration Using an External Host mit STM32 Mikrokontroller und einem EPCS4SI8N

Hallo, ich würde gerne meinen CYCLONE IV im „Single-Device PS Configuration Using an External Host” Konfigurieren. Kann ich dafür einen STM32 Mikrokontroller und einen EPCS4SI8N benutzen. Das FPG...

YuanLi_S_Intel

Regular Contributor

7 years ago

Hi Ramazan, Yes, this is correct. Microcontroller will extract FPGA image from EPCS4SI8N and program FPGA. You can refer to our pin connection guidelines for pin connection. https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/cyclone-iv/pcg-01008.pdf Regards, YL

Forum Discussion

Single-Device PS Configuration Using an External Host mit STM32 Mikrokontroller und einem EPCS4SI8N

Recent Discussions

Why 390.625MHz clock to F-Tile Reference fequency

Cyclone V GT Dev Kit - new units fail to boot from FPP

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera