Forum Discussion

NAdel1's avatar
NAdel1
Icon for New Contributor rankNew Contributor
5 years ago

RSU, Factory and application in CyclonV

I have factory image and application image and it works properly. When the application image corrupt at the beginning the "pof_error" signal is high. but.... When the application image is corrupt i...
NAdel1's avatar
NAdel1
Icon for New Contributor rankNew Contributor
5 years ago

Hi,

Eventually in my fsm that runs the RSU block, before the reset state, i read the register "000" from the RSU, and i checked the bit 0 (CRC_ERROR), if its '1' - turn up ERROR flag and stay in the factory image, else, keep moving to application image.

I tried to read AnF and if it '1' then stay in factory image, but apparently this register erased before it back to factory image after the application error occurred.

Thanx for your help.

regards.