New Contributor
Regular ContributorHi,
Could you please check 'Currently selected hardware' drop down menu for USB- Blaster as shown below?
provide 'device manager' screenshot to ensure USB- Blaster installed successfully.
Regards,
Vicky
New ContributorHi,
Under the Currently selected hardware drop down menu USB-Blaster is not shown. unfortunately I cant take a screenshot showing that drop down open.
Attached you will find the screenshot of Device manager showing the USB-Blaster entry.
I have also gone through the troubleshooting suggestions in the, 'ug_usb_blstr Intel FPGA download cable user guide.pdf' document.
Here is the response to the jtagconfig --serverinfo command:
C:\altera\16.0\quartus\bin64>jtagconfig --serverinfo
Installed JTAG server is 'C:\altera\16.0\quartus\bin64\jtagserver.exe'
Service manager reports server is running
Server reports path: C:\altera\16.0\quartus\bin64\jtagserver.exe
Server reports version: Version 16.0.0 Build 211 04/27/2016 SJ Standard Edition
Remote clients are disabled (no password)
C:\altera\16.0\quartus\bin64>jtagconfig
No JTAG hardware available
Regards
John
