Forum Discussion

Fathima1's avatar
Fathima1
Icon for New Contributor rankNew Contributor
1 year ago

Query on Power up sequence of MAX10 Dual Supply

Hello, I have selected the FPGA part number 10M08DAF256I7G for our design. I would like to confirm whether a specific power-up sequence is mandatory for this device. If a power-up sequence is requi...
Board Debug
AqidAyman_Altera's avatar
AqidAyman_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hello,


For the 10M08DAF256I7G (MAX 10 production device), a specific power-up sequence is not required, unlike early engineering sample (ES) devices, all power rails (VCC, VCCINT, VCCA, VCCIO, etc.) can be ramped up in any order or simultaneously, provided that absolute maximum and recommended operating conditions are not violated. The sequencing shown in the attached images applies only to ES devices; for production devices, you may power the rails without a defined sequence. Please ensure that all supplies are stable before configuration begins.


Reference: https://www.intel.com/content/www/us/en/docs/programmable/683400/18-0/hot-socketing.html


Regards,

Aqid