Forum Discussion

markm_1915's avatar
markm_1915
Icon for New Contributor rankNew Contributor
1 year ago

Quartus do not see Stratix® 10 MX FPGA as a PCIe* card

I have inserted Stratix® 10 MX FPGA into a PCIe* slot, and installed Quartus, but Quartus doesn't see the hardware/FPGA. If there are some problems with PCIe, or I have to install/activate smth?

Fpga Devkit

4 Replies

  • markm_1915's avatar
    markm_1915
    Icon for New Contributor rankNew Contributor
    1 year ago

    I have installed Stratix® 10 MX FPGA into a PCIe* slot, but Windows Device Manager doesn't see it. What can be a problem?

    Still, when the desktop and board powers up, the blue power LED illuminates and the board is ready for use.

  • sstrell's avatar
    sstrell
    Icon for Super Contributor rankSuper Contributor
    1 year ago

    You have to plug in the separate brick power supply. It needs more than just the slot power.

  • markm_1915's avatar
    markm_1915
    Icon for New Contributor rankNew Contributor
    1 year ago

    Thanks! I tried this but doesn't help. I notice that BIOS doesn't see Stratix, and map the PCI slot as empty.

  • Farabi's avatar
    Farabi
    Icon for Regular Contributor rankRegular Contributor
    1 year ago

    "We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

    Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

    We appreciate your patience and understanding, and we are committed to providing you with the best support possible.

    Thank you for your understanding."