Forum Discussion

leond95's avatar
leond95
Icon for New Contributor rankNew Contributor
5 years ago

quartus (11.1sp2 and 15.1) not detecting de0 nano

Hello everyone, I have both quartus 11.1sp2 and quartus 15.0, and both can't find my altera boards (de0 nano and 5CG), the usb blaster drivers are installed and windows 10 can detect my boards as y...
ak6dn's avatar
ak6dn
Icon for Regular Contributor rankRegular Contributor
5 years ago

You didn't post any picture.

What do you mean by "quartus can't find my altera boards"?

Are you using the device programmer tool and having it scan jtag for known devices?

Or what?

Are those boards known to be working?

  • leond95's avatar
    leond95
    Icon for New Contributor rankNew Contributor
    5 years ago

    yes, when I use the programmer tool, and click on hardware setup, I don't find usb blaster, that happened on both version of quartus

    • ak6dn's avatar
      ak6dn
      Icon for Regular Contributor rankRegular Contributor
      5 years ago

      Did you click on 'Add Hardware' over on the right hand side in the Quartus Programmer?

      You need to do that the first time, then Quartus will remember you have that device.

      • leond95's avatar
        leond95
        Icon for New Contributor rankNew Contributor
        5 years ago

        yes i did but nothing happen