Forum Discussion

DGiar's avatar
DGiar
Icon for New Contributor rankNew Contributor
7 years ago

Problems in programming the EPCQ using the AS (Active Serial) configuration.

Hi, I’m using the Cyclone V E FPGA Development Kit and I’m trying to program the EPCQ using the AS (Active Serial) configuration. I did the following steps: - I correctly configured the MSEL pins ...
DGiar's avatar
DGiar
Icon for New Contributor rankNew Contributor
7 years ago

Hi, unfortunately I don't have the USB Blaster II cable (since there isn't in the Cyclone V E Dev Kit).

To program the FPGA I'm using the USB type B cable through the JTAG interface.

Is there any possibility to do it anyway?