Forum Discussion

AJama4's avatar
AJama4
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Porting OpenAMP from Xilinx Board(Zynq-7000) to Intel Board(Cyclone Dev board).

Has somebody already ported OpenAMP on Cyclone V boards or Is there any guideline to how I can port and apply OpenAmp Framework from Xilinx to Cyclone V board. I wanted to use the remoteproc driver w...
AnilErinch_A_Intel's avatar
AnilErinch_A_Intel
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi ,

We do have multiple options for AMP ,

Please follow the links below to get the procedure and demo.

please see the design example below using Poly Platform.

https://fpgacloud.intel.com/devstore/platform/16.1/Standard/multi-core-amp-development-tools-for-altera-cyclone-v-soc/

and a nice discussion about the same

https://community.arm.com/developer/ip-products/system/f/embedded-forum/2945/cortex-a9-dual-core---how-to-achieve-an-amp-system-without-an-rtos

You can also go for Multicore Communications API (MCAPI)

please see the complete example below

https://rocketboards.org/foswiki/Projects/DeviceWideAMP

if you want some literature reference to MCAPI , the following paper is a good read

L. Matilainen, E. Salminen, T. D. Hämäläinen and M. Hännikäinen, "Multicore Communications API (MCAPI) implementation on an FPGA multiprocessor," 2011 International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation, Samos, 2011, pp. 286-293, doi: 10.1109/SAMOS.2011.6045473.

Thanks and Regards

Anil