Forum Discussion
New ContributorPlanning to use Remote sensing update in our device(cyclone V GX
Hi
Planning to use Remote sensing update in our device(cyclone V GX- "5CGXC7D6F31C7" - are there any DEDICATED PINS we need to take care.
we have selected device EPCQ(128) - if i use max image will that be able to accomodate?
Kindly help us regarding this.
Thanks
Pavan
1 Reply
AnandRaj_S_IntelRegular Contributor
Hi Pavan,
No, We dont have any DEDICATED PINS for remote system update.
Just check MSEL pins these get the combination for the configuration scheme as specified in the "Configuration, Design Security, and Remote System Upgrades in Cyclone V Devices" chapter in the Cyclone V Device Handbook.
You have to refer to pin connection guidelines, device handbook and Remote system update user guide.
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/cyclone-v/pcg-01014.pdf
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cyclone-v/cv_5v2.pdf
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_altremote.pdf
Also look into below links for example
https://www.youtube.com/watch?v=L9NnqlPIb74
Regards
Anand
