Forum Discussion

Occasional Contributor

5 years ago

PCIe Gen1 x1 or x4 example design share

we need PCIe Gen1 x1 or x4 example design, it can base CIV GX, C5 GX or C10 GX but we need the simulation testbench would be include into the reference design. would u pls share us the design. if y...

BoonT_Intel

Frequent Contributor

5 years ago

Hi Sir,

For Cyclone 10 PCIe, you can just set to gen1 x1 or x4 accordingly then generate the simulation example design from the GUI directly.

See chapter 2.3. Generating the Design and 2.4. Simulating the Design for details.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_a10_pcie_avst.pdf#page=19

BQi
Occasional Contributor
5 years ago
I want C5GX ref design and simulation prj Thanks and Best Regards! Brand Qi / 齐闯 Arrow Electronics Tel: 010-56064176 or 13911556862 Email: brand.qi@arrowasia.com<blocked::blocked::blocked::blocked::blocked::blocked::blocked::mailto:brand.qi@arrowasia.com> Addr: 28/F, Taikang Financial Tower, 38 North Street of East 3rd Ring, Chaoyang District, Beijing

Forum Discussion

PCIe Gen1 x1 or x4 example design share

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Agilex5 HPS2FPGA usage

Mandelbrot viewer on Cyclone V - Platform Designer layout