Forum Discussion

HIngl1's avatar
HIngl1
Icon for New Contributor rankNew Contributor
6 years ago

Open Cl on De10 nano Development board

Hello, I am following the manual from the link Link1- https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=205&No=1046&PartNo=4 for this-"BSP(Board Support Package) for I...
HIngl1's avatar
HIngl1
Icon for New Contributor rankNew Contributor
6 years ago

File name -DE10_Nano_OpenCL_18.1.pdf , Page -12,Figure 2-1- Location of "D;\intelFPGA\18.1\hld\board\terasic" Folder

the path is for Quartas 18.1 pro , but the open CL here dosent support the pro edition of Quartas it supports only the Standard edition .

Hiroto_K_Intel's avatar
Hiroto_K_Intel
Icon for New Contributor rankNew Contributor
6 years ago

The default root path of current standard version is D\intelFPGA and that of pro version is D\intelFPGA_pro. Additionally, the directory hierarchy under root is same.

Also, if the directory was for pro version, there would be a10_ref and s10gx(not c5soc/s5_ref).

Thus, I think the path(D;\intelFPGA\18.1\hld\board\terasic) is correct.