Forum Discussion

MBier's avatar
MBier
Icon for New Contributor rankNew Contributor
5 years ago

NIOS II with linux system booting from CFI Flash

Hi! I'm working on project where i have to build NIOS II system. The system must load linux kernel from CFI Flash on Cyclone V SoC Development kit but the problem is that there is no user manual for ...
EricMunYew_C_Intel's avatar
EricMunYew_C_Intel
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi, Mateusz


In Quartus, you can go to Assignments->Pin Planner.


May I know which board you are using, any link ?


Eric


MBier's avatar
MBier
Icon for New Contributor rankNew Contributor
5 years ago

Hi Eric!

I have cyclone V dev-kit ( https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html )

So basiclly if there were any pinout which shows that connecting CFI to FPGA is possible i would not ask any question. But all in all is it possible to access CFI from NIOS II ( which is placed in FPGA not in ARM ). Thanks for articles you linked, but i have knowledge about NIOS and CFI.