Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Nios II Evaluation Kit Cyclone III Edition Usb Blaster Not Detected

Hey I am using NIOS II EVALUATION KIT CYCLONE III EDITION. the usb blaster is not recognised in both the flash programmer and the quartus programmer. The driver is installed. I am able to progra...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

At the beginning, I had also problems with using the embedded USB Blaster - an external one worked probably. After some experiments I found out that I have to plug in the USB cable after powering up the development board. Otherwise the JTAG chain was not recognized by Quartus.