Forum Discussion

AW15's avatar
AW15
Icon for New Contributor rankNew Contributor
1 year ago

Max10 JTAG Voltage Overshoot Protection

For voltage overshoot protection on the JTAG, Intel recommended external diodes and capacitors if supplies exceed 2.5V, Refer to pg 38 of Intel Max 10 FPGA Configuration User Guide. Can you recommend...
Fpga Devkit
AqidAyman_Altera's avatar
AqidAyman_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

In the MAX 10 FPGA Configuration User Guide, we recommend using Schottky diodes to prevent voltage overshoot on the JTAG interface of MAX 10 FPGAs. However, the specific part number for the Schottky diodes is not explicitly stated. The guide advises using Schottky diodes due to their lower forward voltage, which is effective for voltage clamping on the JTAG lines.