Forum Discussion
Altera_Forum
Honored Contributor
11 years agoMAX10 Eavluation kit programming
Hi All,
I have a query regards to MAX10 - 10M08 evaluation kit by altera.(http://www.altera.co.uk/products/devkits/altera/kit-max-10-evaluation.html ) Do I need altera programming unit USB blaster or Ethernet Blaster to programming this board. When I am connecting this board to the USB port in programmer window next to Hardware setup shows ( No Hardware) . Please see the screenshot of the No hardware message. It appears to me MAX10 evaluation board is not detected. I dont know weather I need USB blaster to program the device or this device can be programmed without any additional altera programming hardware. Please advise. Regards Arunava7 Replies
- Altera_Forum
Honored Contributor
Yes, you need a USB Blaster cable for that board.
The BeMicro MAX 10 board has different features, but is lower cost and has an embedded USB Blaster. - Altera_Forum
Honored Contributor
--- Quote Start --- Yes, you need a USB Blaster cable for that board. The BeMicro MAX 10 board has different features, but is lower cost and has an embedded USB Blaster. --- Quote End --- Thanks for this information. - Altera_Forum
Honored Contributor
Hi,
USB blaster sold by terasic technology is £34.30 compared to USB blaster sold by Altera. Can I use USB blaster sold by Terasic technologies to program MAX10 FPGA. Please advise. - Altera_Forum
Honored Contributor
Sorry I missed the link for the terasic USB blaster.
http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=&no=46 Altera USB blaster: http://uk.mouser.com/productdetail/altera/pl-usb-blaster-rcn/?qs=jblrfmjbeifezz56mihrcg%3d%3d - Altera_Forum
Honored Contributor
Terasic programmer cable USB blaster
http://uk.mouser.com/search/productdetail.aspx?qs=epbe9gimmvvjzttdlxpoaw%3d%3d - Altera_Forum
Honored Contributor
For reference link to USB blaster download cable.
http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=74 Please advice can this programming cable could be used to program MAX10 FPGA. - Altera_Forum
Honored Contributor
The USB Blaster from Terasic is equal to ALTERA's one - you can go with the Terasic one.