Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Max V Clocks

When using the Max V CPLD Dev Board, is there access to use the on board clocks as a resource? There's a 10MHz (MaxV clock), 6MHz (usb) and a 24MHz xtal on the board, but I dont see these appe...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

The reference manual clarifies that the 10 MHz clock is directly driving the MAX V but doesn't list the pin number.

The information can be found however both in the schematic diagram as well as in the pin assignments of the example designs. 

set_location_assignment PIN_H5 -to CLK_SE_AR