Forum Discussion

Occasional Contributor

6 years ago

Linux boot successful but FPGA not configured from soc_system.rbf file

My Linux image is able to boot successfully the problem is that my FPGA is not able to be configured from my fpga raw binary file that I have copied to fat partition of my sd card. I have tried all ...

EBERLAZARE_I_Intel

Regular Contributor

6 years ago

Hi,

Which board are you using? Arria 10, Cyclone V, etc?

You can refer here for the FPGA configuration:

https://rocketboards.org/foswiki/Documentation/GSRDProgrammingFPGA

Here for the particular boards:

https://rocketboards.org/foswiki/Documentation/GSRD

Regards.

Forum Discussion

Linux boot successful but FPGA not configured from soc_system.rbf file

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Agilex5 HPS2FPGA usage

Mandelbrot viewer on Cyclone V - Platform Designer layout