Forum Discussion

danield17's avatar
danield17
Icon for New Contributor rankNew Contributor
1 month ago

JTAG Chain Broken – Unable to Program Agilex 5 Modular Development Board

Hi, I recently started working with the Agilex 5 Modular Development Board, and it suddenly can no longer be programmed. The USB cable in use is known to be working. When I connect the cable, it i...
Fpga Devkit
soc devkit
danield17's avatar
danield17
Icon for New Contributor rankNew Contributor
1 month ago

Hi Farabi,

As shown in the images in my original post, when I try to select the Agilex 5 in the Configuration Debugger, an error code appears in the Programmer messages window.

More specifically, I go to Menu > Tools > Configuration Debugger > Hardware Setup, then under “Currently selected hardware” I choose “Agilex_5E MDK Carrier [USB-1]” and click “Close,” and immediately after closing the dialog the error message appears.

 

Farabi's avatar
Farabi
Icon for Regular Contributor rankRegular Contributor
1 month ago

Hello Daniel, 

 

Looks like the on-board usb blaster has problem/damaged?

Do you have USB-Blaster II programming cable and try to connect to JTAG port and program? 

 

Please give me your board serial number, lets see if it still under warranty. 

 

regards,

Farabi