Forum Discussion

JBoot1's avatar
JBoot1
Icon for New Contributor rankNew Contributor
6 years ago

Is it possible to automatically boot a Cyclone V to the Application Image at power up in a Remote Update system.

I have a Cyclone V system where we are using Remote Update. I have the factory image in the lower half of the flash and the application image in the upper half. I can manually trigger the FPGA to c...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi John,

Yes it is, to boot into application image instead of factory. What you need to do is to do the setting for the IP. Set the "Configuration Mode (AnF)" to 1.

Thank You.