Intel Programmable Acceleration Card (PAC) with Intel Arria 10 GX FPGA (DK-ACB-10AX1152AES) compatibility DELL and Supermicro (PCIe voltage and Low-profile brackets)

Question

I would know if the Intel Programmable Acceleration Card (PAC) with Intel Arria 10 GX FPGA (DK-ACB-10AX1152AES) is compatible with a Dell R540 or a Supermicro SSG-6049P-E1CR36H server. These serves have standard PCIe 3Gen 16x slots in low-profile format. Is there some special requirement related with the PCIe voltage ?. My last question is about if brackets for the low profile are provided together the FPGA card ?. Thanks.

sengkok_l_intel · Answer

Hi,

For the Arria 10 acceleration card, you can refer to the link below for the qualified server.

https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/acceleration-card-arria-10-gx/buy.html

Have a nice day.

Regards -SK

sengkok_l_intel · Answer

Dell R540 and Supermicro SSG-6049 are not in the qualified server list. This is suggested to use one of the qualified server, else the PAC may not be working, especially thermal related concerns.

Regards -SK Lim

Forum Discussion

Intel Programmable Acceleration Card (PAC) with Intel Arria 10 GX FPGA (DK-ACB-10AX1152AES) compatibility DELL and Supermicro (PCIe voltage and Low-profile brackets)

2 Replies

Recent Discussions

Agilex7 m-series for llama

Agilex 5 reconfigurable PLL - emif

LLM Implementation on Agilex 5 E-Series 065B Modular Dev Kit

Post removed

Fitter error in A5ED043AB23AI2V Example design