Forum Discussion

Abraham's avatar
Abraham
Icon for New Contributor rankNew Contributor
4 years ago

Intel N3000: Seems like the configuration space got corrupted

Hi , I have plugged Intel N3000 card in a Supermicro server with AMD CPU. First time, I was able to properly list the details using the "lspci -vs " command. But after sometime when I again checked...
JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
4 years ago

Hi Abraham,

It seems like you updated the card to an image with DID 0d8f.
The default image has DID 0b32. Could you confirm that you are able to use with the default image...check lspci

If yes, then please check the "md5sum <0d8f bin image>".....make sure you have copied the file correctly before you fpgasupdate it again. Check with the person who provided you the image, what is their md5sum. If it is not matching, then probably you have copied it wrongly.

If you copied it correctly, try again: fpgasupdate --> rsu bmcimg --> check again lspci you should see 0d8f