Forum Discussion

wuhannus's avatar
wuhannus
Icon for New Contributor rankNew Contributor
5 years ago

Intel MAX10 Development Kit PCB request(The provided PCB cannot be open, corrupted)

Hi, My FPGA develop board Manufacture No is DK-DEV-10M50-A (Rev. C). I downloaded the PCB file from the link(https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kit...
AR_A_Intel's avatar
AR_A_Intel
Icon for Super Contributor rankSuper Contributor
5 years ago

Hi Sir


Welcome to INTEL forum. You could also use Cadence Allergo viewer to open the *.brd. Could you help try it and report back if error happen with error message screenshot. Thanks


wuhannus's avatar
wuhannus
Icon for New Contributor rankNew Contributor
5 years ago

Hi Mr. Rahman,

Thanks very much for the reply. We don't have cadence Allegro installed. Instead we have Altium and EAGLE installed. The error screen short of EAGLE is shown bellow.

Could you help contact with the designer to export the PCB file into other format such as Altium Designer's PCB format?

Thanks very much.