Forum Discussion

ZZhou1's avatar
ZZhou1
Icon for New Contributor rankNew Contributor
6 years ago

install OpenCL RTE in customer Linux in Mercury AA1 SoC

Hi everyone, I am using Enclustra Mercury AA1 arria10 SoC to implement a opencl application for FPGA. I used the buildroot and bsp-altera provided by Enclustra to build a customer linux and was able...
MuhammadAr_U_Intel's avatar
MuhammadAr_U_Intel
Icon for Contributor rankContributor
6 years ago
Hi, Did you re-build the driver and install in on your SOC FPGA board ? Please refer to OpenCL RTE getting starter guide. https://www.intel.com/content/www/us/en/programmable/documentation/mwh1391808173911.html#ewa1401204923103 Topic: Recompiling the Linux Kernel Driver and Installing the Intel FPGA RTE for OpenCL Pro Edition onto the SoC FPGA Board There are couple of video series for V series board that might help you copying here for reference. https://www.youtube.com/watch?v=SKJR6PPeDFg Thanks, Arslan
ZZhou1's avatar
ZZhou1
Icon for New Contributor rankNew Contributor
6 years ago
Hi, I noticed I used the run time environment from the downloaded file aocl-pro-rte-17.1.0-240.arm32.tgz. And I can only find "*Intel FPGA Runtime Environment for OpenCL Linux Cyclone V SoC TGZ" *in Intel download web site now. Did I use the wrong run time environment? If I did use the wrong one, where I can download the right run time environment for opencl linux Arria 10 Soc? Thanks and regards, Michael