Forum Discussion

New Contributor

11 months ago

Inable to configure Arria V GX FPGA

Recently I started working with the Arria V GX FPGA in order to start learning about harware design. After I read some ducumentation it was time to configure the FPGA for the very first time. I wante...

Fpga Devkit

FakhrulA_altera

Regular Contributor

10 months ago

Hi Gerstensaft,

Please refer to Arria® V Device Handbook for a more detailed reference for this device.

There are a few KDBs may be related to your issue; some are not but it is worth the check it out:

Why do I receive the error 'CONF_DONE pin failed to go high in device X' when I try to JTAG configure my Intel® FPGA using the Intel® Quartus® Prime Software and a download cable?

Error (209014): CONF_DONE pin failed to go high in device 1

Error (209014): CONF_DONE pin failed to go high in device 1.

Error (209014): CONF_DONE failed to go high in device <number>

Regards,

Fakhrul

Forum Discussion

Inable to configure Arria V GX FPGA

Recent Discussions

A question about reading the configuration space of the R-Tile PCIe IP EP

Regarding Quartus Prime License Activation for the Agilex 5 Evaluation Kit

Stratix 10 Development Kit HiLo connector

Stratix 10 FPGA Dev Kit VCCIO_FMC voltage issue

Mandelbrot viewer on Cyclone V - Platform Designer layout