Forum Discussion

New Contributor

6 years ago

I need to create a secure boot up from the FPGA for the Intel Altera DE1 SoC Cyclone V Board and I have no idea how to go about this.

I have a sd card that has a zimage on it as well as a fpga configuration file so I guess I need to find a way to encrypt it and decrypt it as it goes through boor up. Please help

SreekumarR_G_Intel

Frequent Contributor

6 years ago

Hello Abraham , Can you follow the below link https://rocketboards.org/foswiki/Projects/CycloneVSoCSecureBootExample In details it is explained for the cyclone V devices .Also refer the application note An556. https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an556.pdf if you looking for any specific question , can you please let me know ? thank you, Regards, Sree

ASABE1
New Contributor
6 years ago
I have already looked at that rocket board example but I guess its kind of vague, like I guess for example I’m not sure how to specifically authenticate the next stage boot

Forum Discussion

I need to create a secure boot up from the FPGA for the Intel Altera DE1 SoC Cyclone V Board and I have no idea how to go about this.

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector