Forum Discussion

NAnhT's avatar
NAnhT
Icon for New Contributor rankNew Contributor
6 years ago

I have trouble with demo THDB-ADA board

Im a newbie at FPGA and intel quartus prime. Im trying to practice with cyclone V starter kit and THDB-ADA board to create a 14bits sine wave at 10MHz by a 125MHz clock and a NCO created by IP catalo...
NAnhT's avatar
NAnhT
Icon for New Contributor rankNew Contributor
6 years ago

thank you so much for replying my question. I have solved this problem. I intended to use just channel A of the DAC on the daughter card but it requires clock on both channel A and B. When I used a same clock for channel A and B, it worked and generated 2 sinwave exaclly the same at the output.

CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
6 years ago
Hi, Thanks for your update. Glad to hear that you have managed to resolve the problem. Best regards, Chee Pin