Forum Discussion

New Contributor

6 years ago

I have to select a FPGA for my IR image processing application. I am confused in deciding which factors to consider for selecting the FPGA.

I know there are concerns like I/o pins, memory, cost, etc, but in order to make sure that the FPGA meets my requirements from the IR sensor, what strategy/procedure should I adapt?

CheepinC_altera

Regular Contributor

6 years ago

For your information, you may also visit the following webpage to look for the sales contact closest to your region. Please let me know if there is any concern. Thank you.

https://www.intel.com/content/www/us/en/partner/where-to-buy/overview.html

Forum Discussion

I have to select a FPGA for my IR image processing application. I am confused in deciding which factors to consider for selecting the FPGA.

Recent Discussions

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA