Forum Discussion

Zhilang_X_Intel's avatar
Zhilang_X_Intel
Icon for New Contributor rankNew Contributor
6 years ago

I cannot detect the jtag of my arria 10 fpga via blaster.

I cannot detect the jtag of my arria 10 fpga via blaster. I guess it is related to my wrong action of jtag chain debugger but I do not remember the detail action. Attach the detection result.
ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi,

If you see the similar issue ! warning as above [open Nios II prompt Command, and execute command "jtagconfig".], it probably the windows issue.

Solution:

Open Quartus / Quartus Programmer as Run as Administrator. This should help you to detect the device.

Thanks