Forum Discussion

fzhan51's avatar
fzhan51
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

how to test FPGA PAC N3000 network port

FPGA PAC N3000, configed in 8x10G mode, attached to the Xeron serverA with pcie x16 。we got 40GbE servrB/ 10GbE serverC , QSFP+40G SR-L optical module and 12core mo3 fiber。test case:1) serverA-->one ...
JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi @fzhan51​ I just checked your log, you should be running "lspci -s 06:00.0 -x"

That should point to the XL710, and if the ID shows 0CF8, then thats should be fine.

Expected to see something like:

00: 86 80 f8 0c xx xx xx

fzhan51's avatar
fzhan51
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Dear JwChin,

[fpga@localhost-localdomain modelsim_install]$ lspci -s 06:00.0 -x

06:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 Intel(R) FPGA Programmable Acceleration Card N3000 for Networking (rev 02)

00: 86 80 f8 0c 46 05 10 00 02 00 00 02 08 00 80 00

10: 0c 00 80 93 00 00 00 00 00 00 00 00 0c 80 01 94

20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00

30: 00 00 f8 ff 40 00 00 00 00 00 00 00 07 01 00 00