Forum Discussion

Occasional Contributor

5 years ago

how to test FPGA PAC N3000 network port

FPGA PAC N3000, configed in 8x10G mode, attached to the Xeron serverA with pcie x16 。we got 40GbE servrB/ 10GbE serverC , QSFP+40G SR-L optical module and 12core mo3 fiber。test case:1) serverA-->one ...

JonWay_altera

Frequent Contributor

5 years ago

Hi @fzhan51 First of all, what is the objective of your test? A simple functionality test? If yes, you can refer to:

Test by DPDK

https://www.intel.com/content/www/us/en/programmable/documentation/xgz1560360700260.html#hnb1561577285390

Test by fpgadiag:

https://www.intel.com/content/www/us/en/programmable/documentation/xgz1560360700260.html#hll1561577008230

Forum Discussion

how to test FPGA PAC N3000 network port

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector