Forum Discussion

New Contributor

5 years ago

How to add a new i2c device to Demo?

Hello all, I have a De0 Nano SOC. I have downloaded the Arduino demo, and have successfully programmed the Nano with the project. I know the LCD is working fine, and displaying the Altera logo, but,...

EBERLAZARE_I_Intel

Regular Contributor

5 years ago

Hi,

Are you trying to get the Arduino's I2C as slave and the FPGA's side as master?

Unfortunately, there are no available example design or tutorial on how to connect to Arduino via I2C, I would suggest that you check Arduino's forum for better guidance, here are some that might help:

https://forum.arduino.cc/index.php?topic=604633.0

https://forum.arduino.cc/index.php?topic=564121.0

Forum Discussion

How to add a new i2c device to Demo?

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector