Forum Discussion
ahaa
Occasional Contributor
Occasional ContributorHow could I cool down my pac board N3000-2 and how to check or modify the mode of fan?
When I powered on my N3000-2 and excuted the command of 'fpgainfo temp' to get its temperature info，I found its temp was so high and had a sharp rise, almost to the thresholds of 100℃(FPGA core) or 8...
JonWay_altera
Frequent Contributor
Frequent ContributorYou will have to check with the server vendor. Each vendor method of setting the fan speed is different.
ahaaOccasional Contributor
Occasional Contributorthe problem had been solved now, thanks for your reply
