Forum Discussion

ahaa's avatar
ahaa
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

How could I cool down my pac board N3000-2 and how to check or modify the mode of fan?

When I powered on my N3000-2 and excuted the command of 'fpgainfo temp' to get its temperature info，I found its temp was so high and had a sharp rise, almost to the thresholds of 100℃(FPGA core) or 8...
JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

You will have to check with the server vendor. Each vendor method of setting the fan speed is different.

  • ahaa's avatar
    ahaa
    Icon for Occasional Contributor rankOccasional Contributor
    5 years ago

    the problem had been solved now, thanks for your reply