Forum Discussion

New Contributor

6 years ago

Hi I need to draw a picture with the NIOS II on the DE 10 Nano Board through HDMI onto an ordanary screen. Has someone an idea how to communicate with the HDMI interface ?

I already installed my NIOS and i already tried to control some LEDs and also was able receive some input... I configured it with the Plattform Designer, do I have to add a HDMI IP to the Plattform ...

Ahmed_H_Intel1

Frequent Contributor

6 years ago

Hi,

Please check the following link for the available HDMI examples we have.

https://fpgacloud.intel.com/devstore/platform/?search=hdmi&acds_version=any

There are some examples from third parties you can find them as well.

Forum Discussion

Hi I need to draw a picture with the NIOS II on the DE 10 Nano Board through HDMI onto an ordanary screen. Has someone an idea how to communicate with the HDMI interface ?

Recent Discussions

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA