Forum Discussion

Occasional Contributor

3 years ago

Solved

fpga to hps bridge - stratix 10

Hi all, Currently I am working on understanding the HPS-FPGA bridges on the Stratix 10. I have been able to write from the hps to fpga peripherals using the LW bridge. I am now trying to send data f...

Fpga Devkit

tehjingy_Altera
3 years ago
Hi James

Sorry for the late reply, there was a long weekend in my region.

For building the hardware design, you do not need to run the yocto build all the time.
It is meant for building the rootfs for the linux OS.
If there is not changes to the linux portion you could skip the linux building part and only run only the relevant steps.

Regards
Jingyang, Teh

james57

Occasional Contributor

3 years ago

HI @JingyangTeh_Altera

I have been able to boot my desired hardware design on the board now after following the link you provided -

https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderStratix10#Boot_Linux

I appreciate the help.

I am curious if I have to follow these steps all the way through if I change the hardware design (building yocto each time is slow on my machine) or if there is an easier path.

Thanks,

James

Forum Discussion

fpga to hps bridge - stratix 10

Recent Discussions

DK-DEV-AGI027R1BES FPGA recovery

DK-DEV-AGI027RBES missing device selection

in MAX 10 Dev kit

DK-DEV-AGI027RES Install Package

DK-DEV-AGI027RES Install Package