Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Failed to load ddr3 design.sof using board test system

Hi , I am working on a max10 development kit (with MAX1050DA fpga device on it) and I have installed fpga development software kit to configure ddr3 design (it has other design examples but i ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Yes i could able to work with new ddr.sof file. Can you confirm which development kit version you are using REV B or REVC .These revisions have different ddr3 pin assignments so that may be a part of the issue you are seeing.

These are the software revisions i am using.

Quartus software : 15.0.0.145

Development kit version : REV C

DDR3 design path : "altera\15.0\kits\max10_10m50daf484c6ges_fpga\examples\board_test_system\ddr3\ddr3x24\ddr3x24" (these design should be a part of your development kit software)

FYI.....

I know there are few other reference designs available in altera website and i have tried working on the ddr3 design example from this source("https://cloud.altera.com/devstore/platform/15.0.0/ddr3-with-board-test-system-console/") but i couldn't able to run ddr3 test using board test system.