Forum Discussion

FRen0's avatar
FRen0
Icon for New Contributor rankNew Contributor
7 years ago

Fail to program Stratix 10 Dev Kit for OpenCL SDK 18.1

I have a stratix 10 development kit (DK-DEV-1SGX-H-A) and I am trying to set up the board for OpenCL runtime. Quartus Pro 18.1 just added the new OpenCL support for this reference board with a s10_re...
MuhammadAr_U_Intel's avatar
MuhammadAr_U_Intel
Icon for Contributor rankContributor
7 years ago
Hi, From the log file it seems MaxV programming was sucessful. Please check the jtag frequency with following command jtagconfig --getparam 1 JtagClock If it is set to higher frequency try setting lower frequency. jtagconfig --setparam 1 JtagClock 6M or jtagconfig --setparam 1 JtagClock 3M Thanks, Arslan
FRen0's avatar
FRen0
Icon for New Contributor rankNew Contributor
7 years ago

I’ve tried both already. I also read back the variable to make sure it is set as 3M or 6M. Get the same error regardless. Any other suggestion? I got two straits 10 ref board. Got the same error on both boards.