Honored Contributor
Honored ContributorHi Marv,
--- Quote Start --- There's no CD with it, but it probably originally did. There's a remainder of a white sticker on the ESD bag stating 'EXCALIBUR NIOS VERSION 1.1'. Does that sound familiar? --- Quote End --- Nah, that does not really provide any information. --- Quote Start --- I'll e-mail you a picture of the board and the FPGA. --- Quote End --- Ok, I've attached them. The photo shows an APEX20K200EFC484-2X. The literature for this part can be found (eventually!) on the Altera web site http://www.altera.com/literature/lit-apx.jsp The main thing you really want though is the schematic for the board. Its your lucky day. This is the same kit that I picked up on eBay ... along with the CD-ROM for the kit. I'll see if I've made an example top-level example and post it, along with the schematic and user manual etc (assuming they're on the CD-ROM). The version of Quartus that will work with this kit is likely 9.0sp2, which is the version I use for FLEX10K devices. Cheers, Dave
