Forum Discussion

NYup's avatar
NYup
Icon for New Contributor rankNew Contributor
6 years ago

enable secure JTAG in max10 lockup board.

Error (209014): CONFIG DONE is FAILED to go high What is the problem? I am using Quartus version 18.0 on linux. FPGA MAX10 device number 10M08SAM156CBG I enable Secure JTAG with Intel provided In...
  • NYup's avatar
    NYup
    Icon for New Contributor rankNew Contributor
    6 years ago
    It doesn’t work. I also refer to that document . My board is locked up . I can’t erase or reload anything. Please tell me how to unlock the board Nhu-Ha
  • NYup's avatar
    NYup
    Icon for New Contributor rankNew Contributor
    6 years ago
    Will you send me your QAR for your max10 evaluation board ? I can try it on my max 10 evaluation board . Please tell me how you pulse unlock command. Nhu-Ha
  • NYup's avatar
    NYup
    Icon for New Contributor rankNew Contributor
    6 years ago
    Hello, You said your board is working with secure Jtag. I asked you last week if you will send me the QAR for your max 10 board. I have not heard back from you. It will help me alot since I have been stuck for months now. Nhu-Ha Yup Rajant Corporation 4505 E. Chandler Blvd. #250 Phoenix, AZ 85048 nyup@rajant.com <cmercer@rajant.com> P: 602-362-2150 x2216
  • NYup's avatar
    NYup
    Icon for New Contributor rankNew Contributor
    6 years ago
    Any suggestions on how to unlock the board?? Nhu-Ha Yup Rajant Corporation 4505 E. Chandler Blvd. #250 Phoenix, AZ 85048 nyup@rajant.com <cmercer@rajant.com> P: 602-362-2150 x2216