Forum Discussion

New Contributor

6 years ago

enable secure JTAG in max10 lockup board.

Error (209014): CONFIG DONE is FAILED to go high What is the problem? I am using Quartus version 18.0 on linux. FPGA MAX10 device number 10M08SAM156CBG I enable Secure JTAG with Intel provided In...

YuanLi_S_Intel

Regular Contributor

6 years ago

Hi Nhu,

I believe this is the duplicated case of 04351475. I will continue to support your request in this case 04351475.

Thank You.

Forum Discussion

enable secure JTAG in max10 lockup board.

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work