Forum Discussion

druva1's avatar
druva1
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

Driver(A10SA4) to program Arria 10 PAC

Hi, I have an Arria 10 PAC (programmable acceleration card). I want to use the programmer of Quartus Standard 19.1 to load a simple Verilog code that I have. When I connected the board it shows A...
  • druva1's avatar
    druva1
    5 years ago

    Hi,

    I still have that error in the device manager but I can program the board using Quartus. Not sure how is this possible. So it kinda got fixed at the moment.

druva1's avatar
druva1
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi,

Thank you for your response but it does not work. Windows says it cannot find the A10SA4 driver.

I should mention that I had previously installed the usb-blaster ii as shown in the attached picture.

cheers

druva1's avatar
druva1
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi,

I still have that error in the device manager but I can program the board using Quartus. Not sure how is this possible. So it kinda got fixed at the moment.