Do I always need a jtag programmer or can I in-circuit program my device emulating some kind of protocol/signals?

Question

Hi,I am a bit new to FPGA's. I am interesting in the Max 10 fpga. Any idea with programmer is suitable for the Max 10 -10M08 Eval Kit Board?PL-USB2-BLASTER or the more expansive one PL-USB-BLASTER-RCN?Do I always need an external programmer to program my device?Thanks in advance.Peter

sstrell · Answer

Once you've created and tested your design, you can store the bitstream in the configuration flash memory (CFM) of the device so it will program itself on powerup.#iwork4intel

a_x_h_75 · Answer

Yes, you need a programming cable.https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/download-cables.htmlThere are 3rd party options available. Terasic's option is popular. However, Intel won't support you if you use one.https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&amp;CategoryNo=74&amp;No=46Cheers,Alex

Forum Discussion

Do I always need a jtag programmer or can I in-circuit program my device emulating some kind of protocol/signals?

2 Replies

Recent Discussions

Why 390.625MHz clock to F-Tile Reference fequency

Cyclone V GT Dev Kit - new units fail to boot from FPP

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera