Dear Team, Greetings!!! Can you please provide us the IPC class-6 documents for the below listed products. These were not available in material deceleration tool

Hi Smude,

Have you tried to check from the existing system (in the link below) to generate the IPC report for the FPGA devices? Please search using the valid part number and download the reports.

http://www.altera.com/support/reliability/environmental/material-declaration/material-decl.html

I can see there are already some FPGA Stratix 10 reports available from the system. Refer to the attached screen shots. According to the internal team, they can only generate and publish the reports for valid OPN that is ready for customer booking(ready to be manufacture).

1SG165HN2F43I2VG

1SG085HN2F43I2VG

As shown from the screen shot, the report will not be generate for any ES (Engineering Sample) devices. The report can only be generate for valid production device that are available for customer booking(ready to be manufacture). The internal team confirmed that they cannot generate+publish the reports for following devices that are either inactive OPN, ES (Engineering Sample) and invalid part number. The inactive OPN refers that these devices are not even available for customer booking (not being manufacture) thus there is no way the internal team can generate the report.

1SG210HN2F43E1VG --> inactive OPN

1SG210HU2F50E1VG ---> inactive OPN

1SG280HN2F43E2VGS3 --> ES (Engineering Sample)

1SG280HN2F43I2VGS3 --> invalid part number

I suggest that you should check with your customer how did they obtain the inactive OPN and invalid part number devices as those are not even available for customer booking.

Regards,

Nooraini