Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

De0-Nano niosii Hello World example not loading to flash

Hi, Totally new at FPGA, but super excited about this technology! I've been going through the tutorials downloaded from the website for the De0-Nano and was able to implement everything so f...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

That's bad advice. If there is a mismatched ID or timestamp, it means that for a reason or another, the design currently running in the FPGA isn't the one expected by Eclipse. Ignoring this won't fix the error, and could make things even worse later.

jcraig66, there are already several threads on the forum about this problem, it indicates a mismatch between the hardware and software projects. Regenerate your SOPC Builder/QSys project, recompile the quartus project, flash the FPGA, ensure that the FPGA is indeed running this new design (no configuration error), regenerate the bsp in Eclipse, recompile the software, try to upload.