Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

DE0 connector locations in layout, daughter card development

There is great general information in the readily available university dev boards documents, but I would like to build a daughter card that mates to the DE0. It would be much easier to start with th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

We've made a little daughter card for the DE0 that we use to drive 50 ohm signal generators..

I'll see what I can dig it up. It's about a 2x2 board total. And could power the DE0 via a usb connector on the board if desired.