Datasheet on EZ6301QI has inconsistencies on the footprint page. Specifically, if you follow the recommended footprint the pads for pins 41 and 42 overlap. Also, no dimension for the gap between pins 41/42 and 43.

Question

mostafa_intel_ae · Accepted Answer

Hello John,Thanks so much for your feedback.We catch that error and updated the datasheet, you can get the fixed version from the below link.https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ds/ez6301qi_13926.pdfRegards,Mostafa

Forum Discussion

Datasheet on EZ6301QI has inconsistencies on the footprint page. Specifically, if you follow the recommended footprint the pads for pins 41 and 42 overlap. Also, no dimension for the gap between pins 41/42 and 43.

1 Reply

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector