Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Cyclone IV GX Dev Kit - Errata / Faults / Problems

Cyclone IV GX Dev Kit - Errata / Faults / Problems dk-dev-4cgx150n I'm just going to post stuff here as I find it so that other people have a chance of finding it when they hit similar proble...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Schematic fault.

Rev 01 of the schematic has the direction of the following pins wrong on sheet 15.

ENET_T_RX_CLK is an output from the 88E1111 rather than an input as shown on the sheet port connector.

ENET_MDC is an input to the 88E1111 rather than an output as shown on the sheet port connector.

ENET_INTn is an output from the 88E1111 rather than an input as shown on the sheet port connector.